SMT-350AR Argon Plasma Electrosurgical unit

Introduction:

The output of the machine is fully suspended. It has two independent and isolated type CF anti-defibrillation applications (monopolar and bipolar), non-AP, non-APG type common equipment, 110V-220V (+10%) power supply.

General Description:

SMT-350 Ar and its special probes offers fundamental advantages over conventional coagulation methods.

The Argon Plasma beam permits non-contact coagulation of tissue, homeostasis of large surface bleeding can be stopped effectively and safely. And penetration depth is lesser than 3mm, no lead to carbonization.

Features:

A broad spectrum of applicators in open surgery and for endoscopy

Non-contact application, with no adhesion between applicator and tissue, and good visibility of the coagulation process.

Uniformly effective, wide-area hemostasis and coagulation.

Limited penetration depth, so that application in areas at risk of perforation is superior to all other coagulation methods.

Application:

It is applicable to ESD, EMR, ERCP, POEM, polypectomy, polyp burning, gynecology, orthopedics and surgery.

Open surgery

General surgery: hemostasis of large surface bleeding

Liver and gut surgery: liver transplantation,etc.

Cardiac and thoracic surgery: coronary artery bypass graft surgery, etc.

Traumatology and orthopedics: hemostasis of haemangioma

Parenchyma and bonetumor surgery: devitalization of cancer cell

Endoscopic operation

Gastrointestinal diseases, including tumorous stenosis and ulcer of the esophagus (i.e. oesophageal carcinoma), angiodysplasia and gastrointestinal bleeding (i.e. polypus, gastritis verrucosa, adenoma, malignant gastrointestinal tumors), palliative treatment of end-stage colorectal carcinoma respiratory disease, such as hemoptysis and neoplastic airway obstruction.

Laparoscopic general surgery: Laparoscopic liver resection, laparoscopic cholecystectomy, etc.

Gynaecologic laparoscopic surgery: hemostasis of large surface bleeding and devitalization of cancer cell

Endoscopic otolaryngology: endoscopic hemostasis and devitalization of cancer cell.

Character:

Both hand control and foot control outputs are available.

This machine has a power-off protection circuit, which can memorize the output set value of each function in real time.

Full-function automatic power compensation.

The high-frequency generator has a universal endoscope interface, which is used with gastroscope, enteroscope, laparoscope and other endoscopes.

Adopt ENDO CUT alternative output endoscope mode to provide safe and optimal coagulation effect under endoscope.

Output 10 groups of memory modes, support endoscopic treatment, ESD, ERCP, polypectomy and other operations.

With adjustable high-frequency pulse cutter system, the damage to tissues is minimized, and smokeless cutting.

When the air tube or hand piece tube was blocked or twisted, an alarm indication will be sent and the argon output will be cut off.

When the abdominal pressure pipe was blocked or twisted, an alarm indication will be sent and the argon output will be cut off.

Triple foot switch is controlled independently, convenient and fast.

The instrument is equipped with an argon pressure gauge to accurately and real-time display the argon working pressure.

Passed EMC test.

 Technical data:

Rated output power:

Pure cut：1W~300W (load 500 Ω);
A high-frequency alternating current yields smooth, rapid cuts that evoke little to know hemostasis.

Blend cut 1：1W~200W (load 500 Ω);
Preset blended cut modes give the surgeon varying degrees of hemostasis in cut mode.

Blend cut 2: 1W~150W (load 500 Ω);
The mode is used for vaporization of prostatic tissue or any fat tissue. The higher output wattage gives fast cutting effect of the tissue.

ENDO CUT
The mode is used to automatically controlled cut system to reduce the complication rate of endoscopic sphincterotomy (EST) and serum hyperamylasemia after EST compared to the conventional blended cut mode.

Spray coagulation：1W~80W (load 500 Ω);
Spray output is made for direct coagulation at the tissue with spark. above spark does not give any cutting effect as its CREST FACTOR is high.

DESICATE coagulation：1W~120W (load 500 Ω);
Coagulation in which the active electrode is in direct contact with the tissue is referred to as desiccation and is the type of coagulation used in most surgeries it ensures pinpoint desiccation with less destruction of peripheral tissue.

Bipolar coagulation (Optional)：1W~70W (load 100 Ω);
For highly precise control over coagulation process and privations of carbonization.

Argon:
Dual Argon airflow adjustment, accuracy: 0.1 L/min; Argon pressure range: 0.20 ~ 0.50Mpa, Automatic compensation function stabilize output power, make depletion to its lowest.

Operation:

Ambient temperature range: 5 °C ~ 40 °C;

Relative humidity range: ≤ 80%;

Atmospheric pressure range: 86.0 ~ 106.0kPa;

Power supply: 110V ~ 220V ± 10%

Operating frequency: 416 kHz;

Power supply: 5A, 220V~±10%, 50±1% Hz;

Power consumption: ≤1100VA. (Cut function 300W);

Transportation and storage:

Ambient temperature range: -40°C~ 55°C;

Relative humidity range: ≤95%;

Atmospheric pressure range: 50.0~106.0kPa.

Configuration list