ABOUT US
GET A FREE QUOTE
-
Home
-
Products
-
Maternal & Infant Care
-
Infant Incubator
- SMT-2A Infant Incubator
SMT-2A Infant Incubator
Microprocessor based servo controlled temperature system
Control modes: Air mode and baby skin mode
Humidity is adjustable continuously
Set temperature, air temperature, baby skin temperature, timer and heating power are displayed separately by LED
Integral timer to record therapy time
Self-testing function, various failure alarms by audible and visual
Alarm function: Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure
>37°temperature set function
Triple protection for over temperature with separate cut off device, more safety system
The inclination of infant bed is adjustable
Single wall hood, 4 operating windows and 2 iris ports, 5 infusion seals
Independent locking device for front door
Connector, Oxygen inlet, 1 tray
Control modes: Air mode and baby skin mode
Humidity is adjustable continuously
Set temperature, air temperature, baby skin temperature, timer and heating power are displayed separately by LED
Integral timer to record therapy time
Self-testing function, various failure alarms by audible and visual
Alarm function: Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure
>37°temperature set function
Triple protection for over temperature with separate cut off device, more safety system
The inclination of infant bed is adjustable
Single wall hood, 4 operating windows and 2 iris ports, 5 infusion seals
Independent locking device for front door
Connector, Oxygen inlet, 1 tray
Technical Specification
Power requirement: AC220-230V/50Hz or AC110-120V, 50/60Hz, 850VA
Auxiliary power output: AC220-230V/50Hz, maximum current allowed: 1.6A
Incubator Module
Air temperature control range: 25.0°C-37.0°C (override mode 37.1°C-39.0°C, optional)
Baby temperature control range: 34.0°C-37.0°C (override mode 37.1°C-38.0°C, optional)
Temperature sensor display range: 5°C-65°C
Warm-up time (with the ambient temperature at + 22°C): No longer than 30 minutes
Accuracy of skin temperature sensor: within ± 0.2°C (optional)
Temperature Variation: ≤0.5℃
Difference between the air temperature at one point and the average air temperature: No greater than 0.8°C
Difference between the average air temperature and the control temperature: No greater than 1.0°C
Temperature uniformity (mattress horizontally placed): No greater than 0.8°C
Temperature uniformity (mattress titled): No greater than 1.0°C
Mattress size: 633mm×342mm
Weight display accuracy:±1% (optional)
Inclination of the bassinet: ±12°
Environmental noise in the compartment in incubator mode:
Under stable temperature ≤ 45dB(A)
Under other conditions ≤ 50dB(A)
Failure alarm: power failure alarm, fan motor alarm, sensor alarm, deviation alarm, over-temperature alarm, system alarm and so on
CO2 concentration in the compartment: Lower than 0.5% when the CO2 mixture is pumped in at the speed of 750 ml/min at 10 cm above the center of the mattress
Air flow speed above the mattress: no greater than 0.35 m/s
Environmental Requirement
Operating range: 20°C-30°C
Relative Humidity: 30%RH-75%RH
Atmospheric pressure range:800hPa-1060hPa
Ambient air flow speed: < 0.3m/s
Product Dimension
Dimension:
L1170mm × W620mm × H1620mm (with stand), L1170mm × W620mm × 1550mm-1700mm (with VHA stand)
Distance from the bassinet to the floor:
980mm
950mm-1100mm
Hood size: L 856mm×400mm×454mm
Wheel size(diameter): 100mm
Weight: 103kg (with stand), 113kg (with VHA stand)
Function Introduction
Two control modes: air mode and baby mode controlled by micro-computer
Set temperature, air temperature and baby temperature are displayed separately
Passive humidification
Inclination if bassinet is adjustable
Independent over-temperature protection system
Multiple failure alarm indications
Independent locking device for the front door
RS-232 connector for data output
Oxygen input interface, Oxygen supply system
Low noise DC motor
Air filter system able to get filtration of most common dust in the air circulation and easy to replace
The pressure difference between the spiral duct and the tributary centrifugal fan ensures that fresh air is always inhaled
Standard Configuration
Main body (including baby compartment, base, controller, I.V. pole and tray), stand
Optional Configuration
>37°C override mode, VHA stand, weighing system
Related Products
SMT-050DH Double column Digital Radiography System (Hand-driven)
Double column Digital Radiography System adopts large span independent ball tube frame design, easy installation, small occupation area, convenient maintenance. Four-way floating bed surface, easy to use and positioning. The lifting and lifting of X-ray source and bidirectional follow-up of horizontal position of bed column can reduce the positioning time and meet the requirements of large-flow clinical examination.
Applicable to orthopedics, emergency room, operating room, etc.,As human head, limbs, chest, spine, lumbar spine for medical diagnosis
VSM-3200T 32kW 400mA Veterinary Digital Radiography System
1. Sophisticated technology, high rotating speed, good heat dissipation, high heat capacity, suitable for long-time clinical examination, long product life.
2. High frequency generator with high X-ray inverse frequency, large power and good X-ray quality.
3. Intelligence high voltage control system with various APR.
4. New generation a-Si Csl flat panel detector with high conversion rate achieves digital image acquisition with low dose.
5. High standard digital image processing system provides more post-processing and meets clinical needs.
SM-800L 2-8°C Medicine Refrigerator
Meet the requirements of the new version GSP for medicine storage.
Can be used for medicine, reagents and various items that need cold storage.
Suitable for hospitals, clinics, blood stations of health and epidemic prevention systems, university laboratories, etc.
SMH-60B 5-part Auto Hematology Analyzer
1. Throughput 60T/H.
2. 14-inch touch screen.
3. Tri-angle laser scatter + flow cytometry method + impedance method for RBC and PLT counting.
4. 3D holographic scattergram displays the accurate 5-part differentiation of WBC.
5. Large storage capacity: 300,000 results(including histogram, scattergram, patient information).
