SMT-350A Electrosurgical unit

Performance features
CUT MODE

PURE CUT
A high-frequency alternating current yields smooth, rapid cuts that evoke little to know hemostasis.

BLEND 1
Preset blended cut modes give the surgeon varying degrees of hemostasis in cut mode.

BLEND 2
The mode is used for vaporization of prostatic tissue or any fat tissue. The higher output wattage gives fast cutting effect of the tissue.

BLEND 3
It is used for major coagulation in major surgery, with some cutting functions.

ENDO CUT
The mode is used to automatically controlled cut system to reduce the complication rate of endoscopic sphincterotomy (EST) and serum hyperamylasemia after EST compared to the conventional blended cut mode.

COAG MODE

SPRAY
Spray output is made for direct coagulation at the tissue with spark. above spark does not give any cutting effect as its CREST FACTOR is high.

FORCCE
This mode is greater degree of homeostasis and covers all demands of standard coagulation. This produce the fine attune waveform that creates superficial resistance in the tissue resulting in superior coagulation, where the tissue destroyed by hyper evaporation. This give surgeons the ability to remove surface structures without damaging deeper or peripheral tissues and to cauterize large surface areas quickly when required.

DESICATE
Coagulation in which the active electrode is in direct contact with the tissue is referred to as desiccation and is the type of coagulation used in most surgeries it ensures pinpoint desiccation with less destruction of peripheral tissue.

BIPOLAR MODE

BI-COAG1
For highly precise control over coagulation process and privations of carbonization.

BI-COAG2

This bipolar technology nearly eliminate excessive current even during precision cutting in minute tissue structure

Rated output power:
CUT MODE

Pure cut：1W~350W (Max. 400W, load 500 Ω);

Blend cut 1：1W~250W (load 500 Ω);

Blend cut 2: 1W~200W (load 500 Ω);

Blend cut 3: 1W~150W (load 500 Ω);

ENDO CUT: 99%

COAG MODE

Spray coagulation：1W~80W (load 500 Ω);

Force coagulation: 1W~120W (load 500 Ω);

Desicate coagulation：1W~120W (load 500 Ω);

BIPOLAR

BI-COAG1: 1W~80W (load 100 Ω);

BI-COAG2：1W~100W (load 100 Ω);

Power consumption of the whole machine: ≤ 1100VA. (cut function 350W);

Default Program Modes indication:
0: Open surgery

1: Cut and coagulation alternate output, EMR

2: Pulse cut mode under intestinal ESD

3: Pulse cut mode under Subesophageal ESD

4: Pulse cut mode under Subgastric ESD, ERCP

5: Variable pulse

6: Fine surgery

7: Laparoscopic surgery

8: Monopolar underwater cut

9: Standard procedure

Normal operation

Ambient temperature range: 5 ℃~40 ℃;

Relative humidity range: ≤ 80%;

Atmospheric pressure range: 86.0~106.0kPa;

Power supply: 220V±10%, 50±1Hz; or 110V±10%, 60±1Hz

Working frequency: 416kHz;

Transportation and storage

Ambient temperature range: – 40 ℃~55 ℃;

Relative humidity range: ≤ 95%;

Atmospheric pressure range: 500hPa~1060hPa.

Configuration List