SMT-T300 Infant Warmer

Technical Specification

Power requirement: AC220V-230V/50Hz or AC110V-120V, 50/60Hz, 700VA

Auxiliary power output: AC220V-230V/50Hz, max current 0.3A

Radiant Warmer Module

Skin temperature control range: 34.5℃-37.5℃

Skin temperature display range: 5°C-65°C

Deviation between the measure baby temperature by the sensor and control temperature: ≤0.5℃

Accuracy of skin temperature sensor: ±0.2℃

Temperature uniformity of mattress: ≤2℃

Mattress size: 735mm×590 mm

Failure alarm: power-off alarm, over-temperature alarm, sensor alarm, deviation alarm, setting alarm, check alarm and so on

Working noise: ≤50dB(A)

APGAR timer: audible and visible alarm when the device runs to 50″～1′, 4′50″～5′, 9′50″～10′

Angle of heater head: 0°, 30°, 60°for two ways

Inclination of the bassinet: ±12°

Environmental Requirement

Operating range: 18°C-30°C

Relative humidity: 30%RH-75%RH

Atmospheric pressure range: 800hPa-1060hPa

Ambient air flow speed: < 0.3m/s

Product Dimension

Dimension:

L1100mm × W730mm × H1795 mm (with stand)

L1100mm × W730mm × H1795 mm-1935mm (with VHA stand)

Height from the bassinet to the floor: 890mm

Wheel size(diameter): 150mm

Panel size:

left and right: 746mm × 175mm

front and rear: 580mm × 175mm

Weight：

105kg (with stand)

140kg (with VHA Stand)

Function Introduction

Three control Modes: Pre-warm mode, manual mode and baby mode control by micro-computer

Set temperature and skin temperature can be displayed separately

Horizontal angle of warmer module and inclination of the bassinet can be adjusted

The panels surrounded bassinet can be turned outward or disassembled

The height of whole machine can be adjusted from both sides to meet the operations of medical staff with different heights

Skin temperature sensor shedding alarm prompt function

Data storage function

X-ray cassette under the bassinet

APGAR timer

Multiple failure alarm indications